Liya 17 Feet Police Boat For 10 People With 70-90 HP
Liya Tube Option
✅ French Orca Hypalon or Germany PVC Inflatable Tube
✅ Solid Foam-filled Tube
✅ D Shaped Foam Tube also available according to requirements
Outboard Engine :
Single 70-90 HP
Pontoon Tube Options:
1.The best hyplaon and PVC tube in the world
2.The solid foam tube
3. D shaped foam are also available according to requirements.
More videos please check :https://www.youtube.com/@LiyaBoat
1. Safe Operation Procedures
Pre-Voyage Preparation
Confirm that the inflation level of the tubes aligns with the manufacturer’s guidelines, and examine the hull, valves, and seams for cracks or wear.
Check that the bilge drain plug is properly sealed and verify the presence of essential safety equipment (e.g., life vests, emergency flares, first aid kit).
Inspect engine coolant levels, fuel lines, and ensure the propeller is free from obstructions like fishing lines or seaweed.
While on the Water
Adhere strictly to the boat’s maximum load capacity to maintain stability and buoyancy.
Steer clear of rough sea conditions (e.g., storms, heavy swells) and adjust speed to avoid pounding against waves, which can stress the hull.
Position passengers to balance weight distribution and prevent listing.
Emergency Protocols
If a tube deflates, cease operation immediately, navigate to the nearest safe location, and use emergency patching materials.
Engage the bilge pump if flooding occurs and orient the bow toward oncoming waves to reduce capsizing risks.
2. Maintenance Best Practices
Hull and Tube Care
Aluminum Framework: Wash down the aluminum parts with freshwater after saltwater exposure. Monitor for oxidation or dents, and address bare metal spots with anti-corrosion coatings.
Inflatable Sections: Store tubes away from direct sunlight to prevent UV damage. Clean with non-abrasive solutions, and avoid over-deflation during storage to preserve shape.
Engine Maintenance
Run freshwater through the engine’s cooling system after each use to eliminate salt deposits.
Schedule routine oil changes, inspect spark plugs, and test fuel connections for leaks or wear.
Storage Recommendations
Keep the boat in a shaded, dry area with moderate humidity to prevent mold or metal fatigue.
Maintain partial inflation in tubes when not in use to avoid seam stress.
Periodic Checks
Conduct monthly inspections of tube valves and seams for early signs of wear; replace damaged adhesive strips promptly.
Book annual professional assessments to evaluate hull welds, transom strength, and overall structural integrity.
EN
